Table of Contents
Advertisement
More Settings tab
Select the camera channel to be processed under
"Camera".
Presets
Save and retrieve individual
preset positions.
Pattern
Save and retrieve a motion
pattern.
Patrol
Save and retrieve patrols.
Saving and retrieving presets
1. Use the arrow keys to navigate the camera to the
desired image section.
2. Save the preset position by selecting the "Save
Preset" option and clicking on a position on the
keypad.
3. Click on "Call Preset" and select a position on the
keypad to retrieve the saved presets.
Saving and retrieving a pattern
1. Click on
to start recording.
2. Use the arrow keys to navigate the camera to the
desired image sections and positions.
3. Click on
to save the recording.
4. Click on
to retrieve the pattern you just
saved.
Setting up and calling up patrols
1. Create several presets to use for the patrol
2. Click on
to select a preset and define the
dwell time and speed.
3. Add more presets to set up the required patrol.
4. Then click on
38
to start the patrol.
Motion
Motion detection is controlled solely using the motion
information on the recorder, which has been detected by
the camera. When the camera is connected to the
system, the recorder automatically sets a standard
setting for motion detection directly on the IP camera web
interface. The settings therefore have to be manually
adjusted on the camera's web interface based on the
current conditions.
To set up motion detection, proceed as follows:
1. Select the camera channel to be processed
under "Camera".
2. Tick the "Enable Motion Detection" box and
define any other optional parameters under
"Settings".
3. On a PC, open the web interface for the camera
you have selected and adjust the advanced
settings for the motion mask, threshold and
sensitivity.
4. Repeat the process for any additional cameras.
5. Click on Apply to save the settings.
6. If you wish to record based on motion detection,
switch to the "Record" menu item and select the
relevant cameras under "Schedule". Here you
can configure the schedule using the "Motion"
event in order to set up a motion-detection-based
recording.
7. Click on Apply to save the settings.
Note
To record with the aid of motion detection, you
must set up the schedule under Record.
Note
The sensitivity settings for motion detection need
to be adjusted on the camera web interface.
Camera
Advertisement
Table of Contents
