Table of Contents
Advertisement
Recording
Schedule
Open the main menu and click on Record. There are two
types of configuration and data recording available:
recording
Configuration of video stream
recording from connected IP
cameras. Continuous data
streams are saved on the
recorder.
Capture
Configuration of single image
capture from connected IP
cameras. Only single images are
saved on the recorder.
Note
Both types of recording can be configured in
parallel for each camera.
Record tab
The schedule is used to specify the recording times and
triggers (recording type) for the cameras.
Note
As there is no difference between the settings for
the Record and Capture tabs, they are only listed
once.
On the on-screen display, the hours for each day are
listed from left to right, and the days are listed from top to
bottom. On the right of the display, there is a colour key,
i.e. the time frames for recording are
displayed in the schedule in a different colour depending
on the "trigger" (recording type) in question.
Coloured icon
Key
Blue
Continuous: period in hours
41
Yellow
Motion detection
Red
Alarm
Orange
Motion or alarm
Light blue
Motion and alarm
Grey
No selection
Select the camera and tick the Enable Schedule
box.
Click on a trigger and use your mouse to highlight
the time period within the schedule.
Alternatively, click on Edit to configure the type and
duration of the schedule down to the minute.
1. In the drop-down menu for "Schedule", select the day
to be set.
2. Activate/deactivate "All Day". If "All Day" is activated,
you cannot enter specific times as the setting now
applies to the whole day.
3. If you wish to enter specific time settings, deactivate
"All Day".
Application example
If you want recording to run from 11:00 to 07:00,
you need to set up two time zones:
1. 11:00–24:00
2. 00:00–07:00
Recording
Advertisement
Table of Contents
