Level Adjustment - Daewoo DWD-F1011 Service Manual

Level adjustment

leg
1. The level adjustment of the washing machine pre-
Note: the wooden floor may cause excessive
2. If the floor is uneven, adjust the adjustable leg as
leg
Fixing Nut
vents excessive noise and vibration.
Install the washing machine on a solid and even
floor surface, if possible, in a corner of the room.
vibration.
the following.
(Do not insert pieces of wood etc. under legs.)
• Please check whether there is any gap between
four adjustable legs and the floor.
• Turn adjustable legs by the enclosed spanner in
order to adjust the level of the washing machine.
• Make it sure that there is no swaying of the wash-
ing machine and check that the washing
machine is even completely. (use a spirit level)
• After the level adjustment is finished, turn fixing
nuts up tightly so that the washing machine
maintains the adjustment.
Diagonal Check
When pushing down the edges of the washing
machine top plate diagonally, the machine should
not move up and down at all.
(Please, check both of two directions)
If machine rocks when pushing the machine top
plate diagonally, adjust legs again.
9
INSTALLATION