Epson Stylus COLOR 1520 Service Manual page 30

Color ink jet printer
Hide thumbs Also See for Stylus COLOR 1520:
Table of Contents

Advertisement

EPSON Stylus COLOR 1520

Panel Functions

Power

Load/Eject

LF/FF

Pause

Micro-adjust   Function

Micro-adjust   Function
2
*

Cleaning (Black)

Cleaning (Color)
 
Alt
Note)
1. Before the printer power is off, the printer executes the capping function.
2. When the micro adjust is performed at the TOF (Top Of Form position) for the ASF manual and
tractor feed, the new setting is stored in the corresponding address in the EEPROM.
3. When the micro adjust is performed at the tear off position, the new setting is stored in the
corresponding address in the EEPROM

The power switch is connected to the secondary side of the electrical circuit. Since it has a delay
circuit, voltage is still applied for the specified period of time after the printer power is off.

As long as the printer is plugged in, voltage is applied to the primary side of the electrical circuit.
Therefore be sure to unplug the printer before servicing or replacing the interface.
1-22
:The function of each button is described below.
Function
Available condition
Function
Available condition
Function
Available conditions
Function
Available conditions
Function
Available condition
Available conditions
Available conditions
Function
Available condition
Function
Available condition
Function
Available conditions
:Turns the printer off or on *
:Always
:Loads and ejects the paper.
:Pause/Stand-by
:Feeds one line or page.
:Pause / Stand-by
:Alternates the printer state between printing and non-
printing.
:Pause / Stand-by
: Pressing this button for 3 seconds resets the printer.
:Pause / Stand-by
:Feeds paper forward and is used to execute TOF
2
adjustment *
and Tear off adjustment *
:Pause / Stand-by
:Feeds paper backward and performs TOF adjustment
and Tear off adjustment *
:Pause / Stand-by
:Executes the black ink cartridge cleaning.
:Pause
:Executes the color ink cartridges cleaning.
:Pause
:Enters ink cartridge change mode. Pressing this button
for 3 seconds moves the ink cartridge to the position to
be replaced.
:Pause / Ink out
CAUTION
1
.
3
.
3
.
Rev. A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents