4.
Remove 3 screws (CBB, 3X12) and 2 screws (CBB, 4X2) securing the upper housing to the lower
housing.
5.
Insert the tweezers into the cutouts at the bottom of the upper housing to release the hooks fixing
the upper housing to the lower housing. Then remove the upper housing.
After replacing the upper housing or printer cover, be sure to attach the label such as the
CAUTION label to the specified position.
Printer Cover
Screw (CBB 3X12)
Release Lever
Knob
Knob Sheet
Hooks Fixing the Lower Housing
Rev. A
WORK POINT
Tractor Unit
Screws (CBB 4X20)
Figure 3-4. Upper Housing Removal
Disassembly and Assembly
Rear Sheet Guide
Control Panel
Screws (CBB 3X12)
Upper Housing
Lower Housing
3-5