Download Print this page

Epson Stylus COLOR 1520 Service Manual: Component Repair Of The C211 Main Board

Color ink jet printer.
Hide thumbs

Advertisement

EPSON Stylus COLOR 1520

5.4 Component Repair of the C211 MAIN Board

This section provides information which enables you to repair and replace defective components on the
C211-B MAIN board. Table 5-6 and 5-7 lists the causes for each symptom in order of possibility, with
which you are able to find and repair the defective part.
Table 5-6. Component Repair of the C211 MAIN Board (1)
Symptom
Condition
The printer
CPU doesn't
does not
operate.
operate at all.
The driver
mechanism
doesn't operate
properly at
power on/off.
CR does not
CR motor
operate
does not rotate
normally.
normally.
CPU is defective.
5-10
Cause
Reset circuit is
Check the /RESET signal at
defective.
the pin 1 and 5 V line at pin 3
of the IC1.
Selection of ROM
Check the /CS1 (Pin 1) and
and sub gate array
/CS2 (pin 2) of the CPU (IC7)
is abnormal.
for the change in the signal
High and Low.
CG-ROM or PROM is defective.
CPU is defective. Check the signal form of the
XTAL (pin 85) and EXTAL (pin
86) of the CPU (IC7).
Sub gate array
Check the waveforms of
IC5 is defective.
DATA A (pin 6) or DATA B
(pin 17) of the IC17.
DATA
PF drive output
Checkpoint
Replace the MAIN
board or the reset IC.
Replace the MAIN
board.
Replace the MAIN
board or PROM.
Replace the MAIN
board or CRU1.
Replace the MAIN
board or IC17.
Replace the MAIN
board.
Solution
Rev. A

Advertisement

Table Of Contents

   Also See for Epson Stylus COLOR 1520

   Related Manuals for Epson Stylus COLOR 1520

Comments to this Manuals

Symbols: 0
Latest comments: