Tuner Operation - Jensen JWM6A Installation And Operation Manual

TUNER OPERATION

Select a Band
1. Press MODE DISPLAY button (5) repeatedly to select the radio mode.
2. Press BAND DVD MENU button (12) to select the band (AM1, AM2, FM1, FM2 and FM3).
Manual Tuning
Press the >>| or |<< buttons (16, 15) to seek stations up/down step by step.
Auto Seek Tuning
Press and hold the >>| or |<< buttons (16, 15) to automatically seek the next or previous strong
station.
Preset Stations
Six numbered preset buttons store and recall stations for each
AM and FM band.
Store a Station
Select a band (if needed), then select a station. Press and hold a
1-6 preset button for two seconds. The present number will
appear on the display.
Recall a Station
Select a band (if needed). Press a 1-6 preset button to select the corresponding stored station.
Automatically Store / Preset Scan (AS/PS)
Automatically Store
Select an AM or FM band. Press and hold the AS/PS
and the unit will automatically scan for and store 12 or 18 strongest stations for AM or FM
respectively. To stop this function before the automatic storing is complete, press AS/PS
again.
Preset Scan
Select a band. Press AS/PS button to scan stations stored in the current band. The unit will
pause for 10 seconds at each preset station. Press AS/PS
desired station is reached.
2
JWM6A
button (25) for more than 3 seconds
again to stop scanning when the