Remote Sensor - Jensen JWM6A Installation And Operation Manual

Remote Sensor

Infrared receiver (17) is located on the front panel to receive infrared signal emitted by the
remote control.
Speaker Output
The three speaker output buttons (A SPEAKERS (19), B SPEAKERS (21) and C SPEAKERS
(23)) control speaker output from the radio. Press any of the three buttons to turn the
corresponding speaker sets on or off. SPK A, SPK B or SPK C will appear on the display.
Reset
The reset button should be activated for the following reasons:

Initial installation of the unit when all wiring is completed

Function buttons do not operate

Error symbol on the display
Use a ball point pen or thin metal object to press the reset button (4).
HDMI ARC

Connect HDMI cable to JENSEN TV with ARC function and JWM6A head unit. If set up &
operation is correct, the TV audio will come out from the speaker of head unit after
changed the mode to HDMI ARC mode.

ARC function Operation behavior as following table.
7
JWM6A