Ipod Operation; Controlling Playback - Jensen JWM6A Installation And Operation Manual

iPod OPERATION
®
This unit is equipped with an iPod® ready function that will allow you to control your iPod (if
compatible) using the control panel buttons. The following models are supported:

iPod Nano 5G, 6G, 7G

iPod Classic

iPod Touch 3G, 4G, 5G

iPhone 4, 4S, 5, 5C, 5S
NOTE: Earlier model iPods are not supported because they do not implement the
required control protocol. Also, the iPod shuffle is not supported because it does not
utilize the 30-pin Apple iPod Connector. These unsupported iPod models may be
connected to the radio using one of the Auxiliary Inputs.
Accessing iPod Mode
Connect a supported iPod or iPhone to the USB connector (28). The word "iPod" illuminates in
the upper left corner of the LCD whenever an iPod or iPhone is attached to the USB connector.
Music playback begins automatically.
To enter iPod mode from any other source, press the MODE DISPLAY button (5) repeatedly to
enter the iPod mode. Then "Loading" and "iPod" will be shown on the display.
If the user connects an iPod containing no songs, the radio will display a message stating "No
Songs" when it enters iPod mode. When iPod is
disconnected, it will automatically back to the
previous mode before the USB is connected. During
other playback mode, when USB is connected, press
MODE DISPLAY button to enter USB playback mode
directly.
Turning the iPod On/Off
The iPod power turns on automatically when an iPod
is connected to the USB connector, as long as the
vehicle ignition is turned on. You can turn the iPod off
by disconnecting it or by turning the ignition off. When the ignition is turned off, the iPod will
pause and then enter sleep mode after 2 minutes. While the iPod is connected, the power
cannot be turned on or off from the iPod itself.
NOTE: The iPod will continuously recharge while in iPod playback mode.

Controlling Playback

Selecting Tracks
During playback, press the >>| button (16) to play the next track in the current category. During
the first 2 seconds of the playback, press the |<< button (15) to play the previous track. After the
first 2 seconds of the playback, press the |<< button to play the current song from the start.
Press and hold the |<< / >>| buttons to fast reverse/forward the song.
Pausing Playback
During playback, press the|| button (2) to pause playback. "Pause" will appear on the LCD.
Press || button again to resume playback.
Repeat Play
button (8) to repeat the current song. "RPT ONE" will appear
During playback, press the 3
again to repeat all songs in the current category. "RPT ALL" will appear
on the LCD. Press 3
the third time to stop repeat playback. "RPT OFF" will appear on the
on the LCD. Press 3
LCD.
Random Play
During playback, press the 2 button (7) to play all songs in the current category in random
order. Random play will begin once the current song has finished playing. "RDM ON" will appear
on the LCD. Press 2 again to stop random playback.
NOTE: If you press and hold the |<< or >>| button to change the current song to the
previous/next song, you will exit fast reverse/forward mode.
8
JWM6A