Advanced Routing; Static Routing List - TP-Link TL-WR740N User Manual

For example: If you desire to restrict the internet activities of host with MAC address
00-11-22-33-44-AA to access
Sunday, you should first follow the settings below:
1) Click Add New... button shown in Figure 4-61 to enter the Advanced Schedule Settings
page.
2) In Schedule Description field, create a unique description for the schedule (e.g.
Schedule_1).
3) In Day field, check the Select Days radio button and then select Sat and Sun.
4) In Time field, enter 1800 in Start Time field and 2000 in Stop Time field.
5) Click Save to complete the settings.
Then you will go back to the Schedule Settings page and see the following list.

4.13 Advanced Routing

Figure 4-63 Advanced Routing
There are two submenus under the Advanced Routing menu as shown in Figure 4-63: Static
Routing List and System Routing Table. Click either of them, and you will be able to configure
the corresponding function.

4.13.1 Static Routing List

Choose menu "Advanced Routing → Static Routing List", and then you can configure the
static route in the next screen (shown in
network information must travel to reach a specific host or network.
To add static routing entries:
Click Add New... shown in
1.
TL-WR740N/TL-WR741ND
www.tp-link.com only from 18:00 to 20:00 on Saturday and
). A static route is a pre-determined path that
Figure 4-64
Figure 4-64 Static Routing
, you will see the following screen.
Figure 4-64
69
150Mbps Wireless N Router