TP-Link TL-WR740N User Manual page 92


Note:
If you get Address not found error when you access a Web site, it is likely that your DNS servers
are set up improperly. You should contact your ISP to get DNS server addresses.
 Address Autoconfiguration Type- RADVD (Router Advertisement Daemon) and DHCPv6
(Dynamic Host Configuration Protocol for IPv6) Server.
 Site Prefix Configuration Type - The type of IPv6 address prefix.
Delegated - Get the IPv6 address prefix from the ISP automatically, and the device will
•
delegate it to the LAN.
Static - Configure the Site Prefix and Site Prefix Length manually. Please contact your
•
ISP to get more information before you configure them.
 LAN IPv6 Address - Display the LAN IPv6 address created by the device.
Click the Save button to save your settings.
2) DHCPv6
IPv6 Address - The IPv6 address assigned by your ISP dynamically.

Default Gateway - Display the default gateway in colon-hexadecimal notation provided by

your ISP.
Click the Renew button to renew the IPv6 parameters from your ISP.
Click the Release button to release the IPv6 parameters from your ISP.
TL-WR740N/TL-WR741ND
Figure 4-83 DHCPv6
82
150Mbps Wireless N Router