Forwarding; Virtual Servers - TP-Link TL-WR740N User Manual

3. Click the Save button.
Click the Enable/ Disable All button to make all entries enabled/disabled
Click the Delete All button to delete all entries
Click the Next button to go to the next page and Click the Previous button to return to the
previous page.
4.9

Forwarding

Figure 4-33 The Forwarding menu
There are four submenus under the Forwarding menu (shown in
Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the
corresponding function.
4.9.1

Virtual Servers

Choose menu "Forwarding→Virtual Servers", and then you can view and add virtual servers in
the next screen (shown in
on your LAN. A virtual server is defined as a service port, and all requests from Internet to this
service port will be redirected to the computer specified by the server IP. Any PC that was used
for a virtual server must have a static or reserved IP address because its IP address may change
when using the DHCP function.
Service Port - The numbers of External Service Ports. You can enter a service port or a

range of service ports (the format is XXX – YYY; XXX is the Start port and YYY is the End
port).
TL-WR740N/TL-WR741ND
). Virtual servers can be used for setting up public services
Figure 4-34
Virtual Servers
Figure 4-34
46
150Mbps Wireless N Router
): Virtual Servers,
Figure 4-33