TP-Link TL-WR740N User Manual page 94

3) Static IPv6
 IPv6 Address - Enter the IPv6 address in dotted-decimal notation provided by your ISP.
 Default Gateway - Enter the default gateway in dotted-decimal notation provided by your ISP.
 MTU Size (in bytes) - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. For some ISPs, you may need to modify the MTU. But this is rarely
required, and should not be done unless you are sure it is necessary for your ISP connection.
 Primary DNS - Enter the DNS IPv6 address in dotted-decimal notation provided by your ISP.
 Secondary DNS - Enter another DNS IPv6 address in dotted-decimal notation provided by
your ISP.
 Address Autoconfiguration Type - RADVD (Router Advertisement Daemon) and DHCPv6
(Dynamic Host Configuration Protocol for IPv6) Server.
 Site Prefix Configuration Type - The type of IPv6 address prefix.
Delegated - Get the IPv6 address prefix from the ISP automatically, and the device will
•
delegate it to the LAN.
Static - Configure the Site Prefix and Site Prefix Length manually. Please contact your
•
ISP to get more information before you configure them.
 LAN IPv6 Address - Display the LAN IPv6 address created by the device.
TL-WR740N/TL-WR741ND
Figure 4-84 Static IPv6
84
150Mbps Wireless N Router