Cleaning And Maintenance; Removing And Replacing Burners - Cal Flame BBQ11955P Owner's Manual

16

Cleaning and Maintenance

Removing and Replacing Burners

The burner has three pieces plus a wok ring. If you remove the burner
for cleaning, make sure to clean each piece and replace them in proper
order.
Wok Ring Wok Ring
Removal
1. Disconnect or shut off the gas line connected to the Power Burner.
Wait until the burners are cool.
2. Remove the grate and the wok ring.
3. Lift out the burner by raising the stud from the locking hole and
pulling the burner out carefully to release it from the ignition and
gas supply valves.
4. Set the burner in a safe and dry place.
www.calflamebbq.com
Burner Ring Burner Ring Burner Ring Burner Cap Burner Cap Burner Body Burner Body
Adjustable Air Venturis Adjustable Air Venturis
Power Burner
LTR50001100, Rev. B