Troubleshooting - JVC SR-HD2700E Instructions Manual

Troubleshooting

Problem
Power does not turn on The "HELLO" message remains displayed,
and the unit does not start up.
The cooling fan motor is "FAN LOCKED" is displayed on the display
not working
window of this unit.
Power turns off The "AUTO POWER (OFF)" setting is set to "2
automatically
HOURS" or "6 HOURS".
The temperature of this unit has rose, and
operation has ceased for safety purposes.
The power turns on The "HDMI-CEC" setting is set to "ON".
automatically
Input cannot be switched i.LINK connection is currently being
established.
There are no video Monitor only supports RGB input.
images on the monitor
"HDCP ERROR" is displayed.
Video images may be distorted during
reencoding/dubbing when the monitor (TV) is
connected to this unit using an HDMI cable, or
when the screen resolution is set to "1080p".
Screen is distorted Video images may be distorted during
reencoding/dubbing when the monitor (TV) is
connected to this unit using an HDMI cable, or
when the screen resolution is set to "1080p".
There is no audio sound The "HDMI AUDIO OUTPUT" setting is set to
"OFF".
The amplifier does not support "BITSTREAM"
output.
Dubbing cannot be The title to be dubbed is copyright protected. Titles that are copyright-protected cannot be
performed
A finalized disc has been inserted.
The disc is not formatted.
The SD card is write-protected.
Symptom
Press the [RESET] button on the front panel.
If it does not start up, stop using this unit,
unplug the plug from the outlet, and bring it to
the local dealers in your area.
The cooling fan motor is spoiled. Stop using
the unit, remove the power plug from the outlet,
and contact the local dealers in your area.
Change the "AUTO POWER (OFF)" setting of
"SETUP" to "OFF".
Place this unit in an area with ventilation if
possible, and wait approximately 30 minutes
for it to cool down.
Change the "HDMI-CEC" setting of
"CONNECTION" to "OFF".
Cancel importing, or wait until the connection
ends.
Set "HDMI --> DVI COLOR" in the setting menu
to "RGB FIX".
Use a monitor that supports HDCP.
This is not a malfunction. Change the "HDMI
OUTPUT RESOLUTION" to a value other than
"1080p" (e.g., 1080i) if you find it annoying.
This is not a malfunction. Change the "HDMI
OUTPUT RESOLUTION" to a value other than
"1080p" (e.g., 1080i) if you find it annoying.
Change the "HDMI AUDIO OUTPUT" setting
of "CONNECTION" to "ON".
Use an amplifier that supports bitstream
output.
dubbed. Select a title that is not copyright-
protected.
Insert a disc that has not been finalized.
Format the disc.
Remove the SD card and remove the write
protect lock.
Reference
Action
(A P 16)
-
(A P 85)
-
(A P 91)
(A P 42)
(A P 91)
-
(A P 90)
(A P 29)
(A P 91)
(A P 88)
(A P 28)
-
(A P 30)
(A P 32)
Troubleshooting
Page
113