JVC SR-HD2700E Instructions Manual page 31

5 Select "YES", and press the [OK] button in the
format confirmation screen
.
0 Formatting starts.
0 After formatting is complete, a "THE DISC HAS BEEN
FORMATTED" message appears on the monitor, and the
normal screen is displayed.
.
Memo :
0 To return to the initial screen without formatting the disc,
select "DO NOT FORMAT" and press the [OK] button.
Alternatively, you can press the [RETURN] button to return to
the initial screen without formatting.
Note :
0 Do not turn off the power or unplug the power cable when the
"FORMATTING DISC..." message is displayed.
0 Note that formatting a disc with protected titles erases all the
titles from the disc.
Cancel formatting
1 Press the [OPTION] button while formatting
.
2 Select "STOP", and press the [OK] button
0 A confirmation screen to stop formatting appears.
3 Select "YES" on the confirmation screen and
press the [OK] button
.
0 Formatting is stopped.
Note :
0 Formatting can be stopped if it seems to take a long time
(more than two minutes).
0 If for any reason formatting cannot be stopped, the
confirmation screen for stopping formatting will not appear
even if the [OPTION] button is pressed.
31
Formatting