Formatting - JVC SR-HD2700E Instructions Manual

Formatting

Unused discs or SD cards may require formatting in some
cases.
When the need arises, format the disc or SD card accordingly.
Memo :
0 Formatting a disc or SD card erases all existing data from the
media.
Double-check carefully before formatting so as not to erase
important titles.
Format chart
Refer to the following chart for the disc types and format when
formatting a disc.
Note :
0 If a disc is formatted using an equipment not manufactured
by JVC, the disc may not be read correctly even though it
corresponds to the chart below.
In this case, reformat the disc using this unit, or make use of
another blank disc.
Memo :
0 BD-R and DVD-R discs can only be formatted once.
0 When a disc is re-formatted into another format, remove the
disc and load it again.
DVD format chart
Format
DVD- Single-sided,
RW single layer
(4.7 GB)
DVD-R Single-sided,
single layer
(4.7 GB)
Single-sided,
dual layer
(8.5 GB)
ü : Format supported.
BD format chart
BDAV Format
BD-RE Single-sided,
single layer
(25 GB)
Single-sided,
dual layer
(50 GB)
BD-R Single-sided,
single layer
(25 GB)
Single-sided,
dual layer
(50 GB)
ü : Format supported.
30
Formatting
VR Format Video Format
ü ü
ü ü
ü ü
BDMV Format
ü ü
ü ü
ü ü
ü ü
Formatting a disc
1 Set the DVD or BD to be formatted on the disc tray
2 Press the [MEDIA MANAGE] button on the remote
control unit
0 The Media Management menu screen appears.
.
3 Select "FORMAT" from "BD/DVD"
0 A format selection screen appears.
4 Select a format mode from the format selection
screen
.
DVD : Select a "Format mode" from "VR MODE" or
"VIDEO MODE".
BD : Select a "Format mode" from "BDAV MODE" or
"BDMV MODE".
Memo :
0 When "BDMV MODE" is selected, a "FOR DIRECT
RECORDING" or "FOR DUBBING" selection screen appears
after "Format mode" is selected.
To record directly to a BDMV format disc, select "FOR
0
DIRECT RECORDING".
To use a BDMV format disc for purposes other than direct
0
recording, select "FOR DUBBING".