Troubleshooting - JVC SR-HD2500US Instructions Manual

Others

Troubleshooting

Problem
Power does not turn on
"FAN LOCKED" is
displayed on the display
window of this unit
Power turns off
automatically
The power turns on
automatically
Input cannot be
switched
There are no video
images on the monitor
Screen is distorted
There is no audio sound The "HDMI AUDIO OUTPUT" setting
Dubbing cannot be
performed
High-speed dubbing
cannot be performed for
EP mode titles
104
Symptom
The "HELLO" message remains
displayed, and the unit does not start
up.
The cooling fan motor is not working.
The "AUTO POWER (OFF)" setting is
set to "2 HOURS" or "6 HOURS".
The temperature of this unit has rose,
and operation has ceased for safety
purposes.
The "HDMI-CEC" setting is set to
"ON".
i.LINK connection is currently being
established.
Monitor only supports RGB input.
"HDCP ERROR" is displayed.
Video images may be distorted during
reencoding/dubbing when the monitor
(TV) is connected to this unit using a
HDMI cable, or when the screen
resolution is set to "1080p".
Video images may be distorted during
reencoding/dubbing when the monitor
(TV) is connected to this unit using a
HDMI cable, or when the screen
resolution is set to "1080p".
is set to "OFF".
The amplifier does not support
"BITSTREAM" output.
The title to be dubbed is copyright
protected.
A finalized disc has been inserted.
The disc is not formatted.
The SD card is write-protected.
Dubbing cannot be performed and
"SOME TITLES CANNOT BE
DUBBED" is displayed when trying to
perform high-speed dubbing of a EP
mode title to a DVD-VIDEO mode
disc.
Action
Press the [RESET] button on the front
panel.
If it does not start up, stop using this unit,
unplug the plug from the power point, and
bring it to the dealer or "Service Center".
The cooling fan motor is spoiled. Remove
the power plug from the power point, and
consult the dealer from which this product
is purchased, or any nearby JVC Servicing
Center.
Change the "AUTO POWER (OFF)"
setting of "SETUP" to "OFF".
Place this unit in an area with ventilation if
possible, and wait approximately 30
minutes for it to cool down.
Change the "HDMI-CEC" setting of
"CONNECTION" to "OFF".
Cancel importing, or wait until the
connection ends.
Set "HDMI --> DVI COLOR" in the setting
menu to "RGB FIX".
Use a monitor that supports HDCP.
This is not a malfunction. Change the
"HDMI OUTPUT RESOLUTION" to a value
other than "1080p" (e.g., 1080i) if you find
it annoying.
This is not a malfunction. Change the
"HDMI OUTPUT RESOLUTION" to a value
other than "1080p" (e.g., 1080i) if you find
it annoying.
Change the "HDMI AUDIO OUTPUT"
setting of "CONNECTION" to "ON".
Use an amplifier that supports bitstream
output.
Titles that are copyright-protected cannot
be dubbed. Select a title that is not
copyright-protected.
Insert a disc that has not been finalized.
Format the disc.
Remove the SD card and remove the write
protect lock.
Set "HIGH-SPEED DUBBING" in the
settings menu to "4:3" before recording or
importing in the EP mode.
Reference
Page
(A page 13)
-
(A page 78)
-
(A page 85)
(A page 39)
(A page 84)
-
(A page 84)
(A page 26)
(A page 84)
(A page 82)
(A page 25)
-
(A page 27)
(A page 29)
(A page 26)
(A page 80)