Table of Contents
Advertisement
Troubleshooting
Problem
Power does not turn on
The "HELLO" message remains displayed,
and the unit does not start up.
The cooling fan motor is
"FAN LOCKED" is displayed on the display
not working
window of this unit.
Power turns off
The "AUTO POWER (OFF)" setting is set to "2
automatically
HOURS" or "6 HOURS".
The temperature of this unit has rose, and
operation has ceased for safety purposes.
The power turns on
The "HDMI-CEC" setting is set to "ON".
automatically
Input cannot be switched i.LINK connection is currently being
established.
There are no video
Monitor only supports RGB input.
images on the monitor
"HDCP ERROR" is displayed.
Video images may be distorted during
reencoding/dubbing when the monitor (TV) is
connected to this unit using an HDMI cable, or
when the screen resolution is set to "1080p".
Screen is distorted
Video images may be distorted during
reencoding/dubbing when the monitor (TV) is
connected to this unit using an HDMI cable, or
when the screen resolution is set to "1080p".
There is no audio sound The "HDMI AUDIO OUTPUT" setting is set to
"OFF".
The amplifier does not support "BITSTREAM"
output.
Dubbing cannot be
The title to be dubbed is copyright protected. Titles that are copyright-protected cannot be dubbed. Select
performed
A finalized disc has been inserted.
The disc is not formatted.
The SD card is write-protected.
"NEXT" cannot be selected when a title that
cannot be dubbed is chosen.
"NEXT" cannot be selected due to insufficient
disc space.
"NEXT" cannot be selected as a dubbing title
list is not created.
High-speed dubbing
Dubbing cannot be performed and "SOME
cannot be performed for
TITLES CANNOT BE DUBBED" is displayed
EP mode titles
when trying to perform high-speed dubbing of
a EP mode title to a DVD-VIDEO mode disc.
Symptom
Press the [RESET] button on the front panel.
If it does not start up, stop using this unit, unplug the plug
from the outlet, and bring it to the local dealers in your area.
The cooling fan motor is spoiled. Stop using the unit, remove
the power plug from the outlet, and contact the local dealers
in your area.
Change the "AUTO POWER (OFF)" setting of "SETUP" to
"OFF".
Place this unit in an area with ventilation if possible, and wait
approximately 30 minutes for it to cool down.
Change the "HDMI-CEC" setting of "CONNECTION" to
"OFF".
Cancel importing, or wait until the connection ends.
Set "HDMI --> DVI COLOR" in the setting menu to "RGB
FIX".
Use a monitor that supports HDCP.
This is not a malfunction. Change the "HDMI OUTPUT
RESOLUTION" to a value other than "1080p" (e.g., 1080i) if
you find it annoying.
This is not a malfunction. Change the "HDMI OUTPUT
RESOLUTION" to a value other than "1080p" (e.g., 1080i) if
you find it annoying.
Change the "HDMI AUDIO OUTPUT" setting of
"CONNECTION" to "ON".
Use an amplifier that supports bitstream output.
a title that is not copyright-protected.
Insert a disc that has not been finalized.
Format the disc.
Remove the SD card and remove the write protect lock.
Select at least one content for dubbing.
Set "HIGH-SPEED DUBBING" in the settings menu to "4:3"
before recording or importing in the EP mode.
Action
0 Dubbing may start when you return to recording mode
selection to change the recording mode.
0 Some titles cannot be dubbed depending on their
recording mode and format.
You can distinguish titles that cannot be dubbed by
selecting the titles one by one.
0 Dubbing may start when you return to recording mode
selection to change the recording mode.
0 Dubbing may start after reducing the number of titles to
be dubbed.
0 Dubbing may start by switching to a dual layer disc.
11
Troubleshooting
Advertisement
Table of Contents
