JVC SR-HD2700E Instructions Manual page 25

Changing the time display style
You can specify the display style of the time as follows.
1 Press the [SET UP] button on the remote control
unit
2 Select "SETUP", and press the [OK] button
0 The Settings menu screen appears.
.
3 Select "CLOCK SET/DISPLAY", and press the
[OK] button
0 The Clock Set/Display menu screen appears.
.
4 Select "TIME DISPLAY CHOICE", and press the
[OK] button
0 The Time Display menu screen appears.
.
5 Select the time display style
.
0 Select from "12H" or "24H".
12H : Displays the time in AM/PM format.
24H : Displays the time in 24-hour format.
6 Press the [OK] button after making a selection
0 The time display style will be saved.
Memo :
0 The time display style applies to the following.
Current time
0
Date/time registered on the disc
0
Recording date of the title that is shown in the playback
0
navigation screen
(The recording date will be shown in place of the title if the
title has not been input.)
Time of recording that is displayed in the title information
0
display screen
Setting and Displaying Date/Time
25