Display (In Video Mode); Lamp - Dell M209X User Manual

DISPLAY (in Video Mode)

automatically switches to Custom.
S T —Manually select signal type RGB, YCbCr, or YPbPr.
IGNAL YPE
Z —Press
OOM
screen and press
Z N
OOM AVIGATION
W I
HITE NTENSITY
the brightness.
D —Adjust among the 4 preset values to change the color performance of
EGAMMA
the display.

LAMP

minutes. However, you can set this to 5 minutes, 15 minutes, 30 minutes, 45
minutes, 60 minutes, or 120 minutes.
If an input signal is not detected during the delay period, the projector turns off
the lamp and goes into power saving mode. If an input signal is detected within
the delay period, the projector automatically turns on. If an input signal is not
Downloaded from ProjectorsManual.com Manuals
to digitally magnify a default area of image in the center of the
to reduce the zoomed image.
—Press
—Set 0 to maximize the color reproduction and 10 to maximize
V
IDEO
mode to optimize the
display on how the
projector is being used:
PC, Movie, sRGB
(provides more accurate
color representation),
Game, and Custom (set
your preferred settings). If
you adjust the settings for
White Intensity or
Degamma, the projector
to navigate projection screen.
L H
AMP
operating hours since the last
lamp timer reset.
P
OWER
set the Power Saving delay
period. The delay period is
the time you want the
projector to wait without an
input signal. By default, the
delay period is set to 120
Using Your Projector
M —Select a
ODE
—Displays the
OUR
S —Select Yes to
AVING
25