Display (In Video Mode) - Dell M409WX User Manual

V P —Press
ERTICAL OSITION
up.
F —Allows you to change the display data clock frequency to match the
REQUENCY
frequency of your computer graphics card. If you see a vertical flickering bar, use
Frequency control to minimize the bars. This is a coarse adjustment.
T —Allows you to synchronize the phase of the display signal with the
RACKING
graphic card. If you experience an unstable or flickering image, use Tracking to
correct it. This is a fine adjustment.

DISPLAY (in Video Mode)

projector automatically switches to Custom.
S T —Allows you to manually select the signal type. You set the signal type
IGNAL YPE
to RGB, YCbCr, or YPbPr.
Z —Press to digitally magnify a default area of image in the center of the
OOM
screen and press
Z N —Press
OOM AVIGATION
W I —Set 0 to maximize the color reproduction and 10 to maximize
HITE NTENSITY
the brightness.
D —Allows you to adjust the color performance of the display. You can set
EGAMMA
the Degamma value to: 1, 2, 3, and 4. Adjust among the 4 preset values to change
the color performance of the display.
to move the image down and
to reduce the zoomed image.
to navigate projection screen.
http://www.pureglare.com.au
to move the image
V M —Allows you to
IDEO ODE
optimize the projector's
display mode.
•PC, Movie, sRGB -
provides accurate color
representation
•Game, and Custom - set
your preferred settings
NOTE:
If you adjust
the settings for White
Intensity or Degamma, the
Using Your Projector 25