Display (In Video Mode) - Dell M210X User Manual

V
ERTICAL
up.
F
REQUENCY
frequency of your computer graphics card. If you see a vertical flickering wave, use
Frequency control to minimize the bars. This is a coarse adjustment.
T
RACKING
experience an unstable or flickering image, use Tracking to correct it. This is a fine
adjustment.

DISPLAY (in Video Mode)

Using the Display menu, you can adjust the display settings of your projector. The
Picture menu provides the following options:
A R
SPECT
appears.
•
according to input source.
•
•
wide screen image.
Downloaded From projector-manual.com DELL Manuals
P —Press
OSITION
—Allows you to change the display data clock frequency to match the
—Synchronize the phase of the display signal with the graphic card. If you
—Allows you to select the aspect ratio to adjust how the image
ATIO
Original — Select Original to maintain the aspect ratio of image projected
4:3 — The input source scales to fit the screen and projects a 4:3 image.
Wide — The input source scales to fit the width of the screen to project a
Z —Press
OOM
Select the area to zoom and press
Z N
OOM
menu.
Use
to move the image down and
to activate Zoom menu.
Adjust the image scale by pressing
press to view.
—Press
AVIGATION
to navigate projection screen.
to move the image
to view zoomed image.
to activate Zoom Navigation
Using Your Projector
or and
31