Display (In Video Mode) - Dell 1409X User Manual

F —Allows you to change the display data clock frequency to match the
REQUENCY
frequency of your computer graphics card. If you see a vertical flickering wave, use
Frequency control to minimize the bars. This is a coarse adjustment.
T —Synchronize the phase of the display signal with the graphic card. If you
RACKING
experience an unstable or flickering image, use Tracking to correct it. This is a fine
adjustment.

DISPLAY (in Video Mode)

Using the Display menu, you can adjust the display settings of your projectors.
The Picture menu, provides the following options:
V M —Allows you to optimize the projectors display mode:
IDEO ODE
PC, Movie, sRGB (provides more accurate color representation), Game, and
Custom (set your preferred settings). If you adjust the settings for White Intensity
or Degamma, the projector automatically switches to Custom.
NOTE:
If you adjust the settings for White Intensity or Degamma, the projector
automatically switches to Custom.
S T —Manually select signal type RGB, YCbCr, or YPbPr.
IGNAL YPE
Z —Press to digitally magnify an image up to 4 times on the projection
OOM
screen and press
Z N —Press
OOM AVIGATION
W I —Set 0 to maximize the color reproduction and 10 to maximize
HITE NTENSITY
the brightness.
D —Adjust among the 4 preset values (1, 2, 3, 4) to change the color
EGAMMA
performance of the display.
28 Using Your Projector
to reduce the zoomed image.
to navigate projection screen.
http://www.pureglare.com.au