Table of Contents
Advertisement
F
REQUENCY
frequency of your computer graphics card. If you see a vertical flickering wave, use
Frequency control to minimize the bars. This is a coarse adjustment.
T
RACKING
graphic card. If you experience an unstable or flickering image, use Tracking to
correct it. This is a fine adjustment.
DISPLAY (in Video Mode)
Using the Display menu, you can adjust the display settings of your projectors.
The Picture menu, provides the following options:
V
M
IDEO
PC, Movie, sRGB (provides more accurate color representation), Game, and
Custom (set your preferred settings). If you adjust the settings for White Intensity
or Degamma, the projector automatically switches to Custom.
NOTE:
automatically switches to Custom.
S
T
IGNAL
Z
—Press
OOM
screen and press
Z
N
OOM
AVIGATION
W
I
HITE
NTENSITY
the brightness.
D
EGAMMA
performance of the display.
Downloaded From projector-manual.com DELL Manuals
—Allows you to change the display data clock frequency to match the
—Allows you to sybchronize the phase of the display signal with the
—Allows you to optimize the projectors display mode:
ODE
If you adjust the settings for White Intensity or Degamma, the projector
—Manually select signal type RGB, YCbCr, or YPbPr.
YPE
to digitally magnify an image up to 4 times on the projection
to reduce the zoomed image.
—Press
—Set 0 to maximize the color reproduction and 10 to maximize
—Adjust among the 4 preset values (1, 2, 3, 4) to change the color
to navigate projection screen.
Using Your Projector
31
Advertisement
Table of Contents
