Adjusting The Projected Image; Raising The Projector Height; Lowering The Projector Height - Dell M209X User Manual

Disconnect the power cord from the electrical outlet and the projector.
4
NOTE:
If you press the Power button
"Press Power Button To Turn Off Projector" message appears on the screen. To
clear the message, press a button on the control panel. The message disappears after
5 seconds.

Adjusting the Projected Image

Raising the Projector Height

Press the elevator button.
1
Raise the projector to the desired display angle, and then release the button to
2
lock the elevator foot into position.
Use the tilt adjustment wheel to fine-tune the display angle.
3

Lowering the Projector Height

Press the elevator button.
1
Lower the projector, and then release the button to lock the elevator foot into
2
position.
3
1
Elevator button
2
Elevator foot
14 Using Your Projector
Downloaded from ProjectorsManual.com Manuals
1
3
while the projector is running, the
2