Configuring Personal Information
Methods to configure Users' personal information will now be explained.
Login to VC ONLINE, and click on [Personal] from the [User] menu. The
[Personal] screen will be displayed, allowing changes to be made to the
personal information of the logged in User.
[Personal] Screen
Setting Category
Password
Last Name
Middle Name
First Name
e-mail
IP Address
FT Connection
FT Tunnel Type
Set
76
Configuring Personal Information
Description
Password the user originally registered.
User's last name that is displayed in the [Member List] on the
communications screen.
User's middle name that is displayed in the [Member List] on the
communications screen.
User's first name that is displayed in the [Member List] on the
communications screen.
User's e-mail address.
Enter if the terminal that will be used by the user has been
assigned a fixed IP address.
Select the Firewall Traversal setting.
Autodetect FT: Automatically determine whether Firewall
Traversal is necessary when connecting to the HD VISUAL
COMMUNICATION SERVER, and connect via the FT personal
client only if necessary.
Autodetect GC: Automatically determine whether Firewall
Traversal is necessary when connecting to the HD VISUAL
COMMUNICATION SERVER, and connect via the FT group
client only if necessary.
Use FT: Always use the FT personal client when connecting to
the HD VISUAL COMMUNICATION SERVER.
Use GC: Always use the FT group client when connecting to the
HD VISUAL COMMUNICATION SERVER.
NONE: Connect without using Firewall Traversal.
Note
FT personal clients can only be used from a PC Endpoint terminal.
Therefore, [Autodetect FT] and [Use FT] cannot be used from an
H.323 terminal.
Select the tunnel type for Firewall Traversal. Configure this only
when using Firewall Traversal.
NONE: Do not specify a tunnel type.
TCP: Connect using a TCP tunnel.
UDP: Connect using a UDP tunnel.
Select the checkbox to enable the [Action], [Forwarding Type],
and [Forwarding Destination] settings. This can be configured for
each [Condition].