Registering Vcmp Servers; Register Vcmp Server Information - Sony PCS-VCS IPELA Operating Instructions Manual

Registering VCMP Servers

After setting up the VCMP server, register the VCMP server information in
VC ONLINE.
This section describes how to register and edit the VCMP server information.

Register VCMP Server Information

1
Login to VC ONLINE (http://[HD VISUAL COMMUNICATION
SERVER address]:8080/) using an account with administrator privileges.
2
Click on [Media Processor] from the [Server] menu.
The [Media Processor] screen will be displayed.
3
Click the [Add] button.
The [Add VCMP Server] screen will be displayed.
4
Enter the [VCMP Server Type], [VCMP Server Display Type], [VCMP
Server Hostname (FQDN)], and [Capacity], and then click [Add].
If you set up multiple VCMP servers, be sure to register all the VCMP
servers.
5
Restart the VCMP server.
6
Restart the HD VISUAL COMMUNICATION SERVER.
The VCMP server is registered to the HD VISUAL COMMUNICATION
SERVER.
Note
Always turn on the VCMP server before the HD VISUAL COMMUNICATION
SERVER.
[Add VCMP Server] Screen
Setting Category
VCMP Server ID Depending on the system, this displays the automatically indexed
VCMP Server
Type
VCMP Server
Display Type
VCMP Server
Hostname
(FQDN)
Capacity
Description
ID of the VCMP server. This cannot be modified.
Select whether the VCMP server is a master or slave.
Enter the name of the VCMP server.
Enter the hostname of the VCMP server.
Enter the maximum number of users that can connect to the
VCMP server.
Registering VCMP Servers
73