Starting and Stopping the HD VISUAL
COMMUNICATION SERVER
During installation, the HD VISUAL COMMUNICATION SERVER is
configured to automatically start when the OS starts, and automatically stop
when the OS stops.
HD VISUAL COMMUNICATION SERVER Manual Startup
The procedure for starting the HD VISUAL COMMUNICATION SERVER
by manual command will now be explained.
1
Right-click on the Server Desktop, and click on [Open Terminal] in the
Menu.
The Terminal Software will open.
2
Execute the following command in the terminal software.
# /usr/local/vn/bin/vnstart
HD VISUAL COMMUNICATION SERVER Manual Close
The procedure for closing the HD VISUAL COMMUNICATION SERVER
by manual command will now be explained.
Note
Do not close the HD VISUAL COMMUNICATION SERVER while still using
conference, etc.
1
Right-click on the Server Desktop, and click on [Open Terminal] in the
Menu.
The Terminal Software will open.
2
Execute the following command in the Terminal Software.
# /usr/local/vn/bin/vnstop
Note
After closing the server, wait about one minute before starting it again.
Starting and Stopping the HD VISUAL COMMUNICATION SERVER
11