Auto-Negotiation - Planet WGSD-10020 Series User Manual

User's Manual of WGSD / WGSW Layer 2+ Series
the re-transmission rate. No packet loss will occur.

5.5 Auto-Negotiation

The STP ports on the Switch have built-in "Auto-negotiation". This technology automatically sets the best possible bandwidth
when a connection is established with another network device (usually at Power On or Reset). This is done by detecting the
modes and speeds of both devices which are connected. Both the 10BASE-T and 100BASE-TX devices can connect with the
port in either half- or full-duplex mode. 1000BASE-T can be only connected in full-duplex mode.
347