Port Tag Remarking - Planet WGSD-10020 Series User Manual

 Queue Scheduler
Percent
 Port Shaper Enable
 Port Shaper Rate

Port Shaper Unit
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the previous page.

4.9.6 Port Tag Remarking

This page provides an overview of QoS Egress Port Tag Remarking for all switch ports. The Port Tag Remarking screen in
Figure 4-9-6 appears.
"Weighted".
Shows the weight in percent for this queue. This parameter is only shown if
"Scheduler Mode" is set to "Weighted".
Controls whether the port shaper is enabled for this switch port.
Controls the rate for the port shaper. The default value is 500. This value is
restricted to 100-1000000 when the "Unit" is "kbps", and it is restricted to
1-13200 when the "Unit" is "Mbps".
Controls the unit of measure for the port shaper rate as "kbps" or "Mbps". The
default value is "kbps".
Figure 4-9-6: QoS Egress Port Tag Remarking Page Screenshot
User's Manual of WGSD / WGSW Layer 2+ Series
192