Boot Up Numlock Status - VIA Technologies COME8X80 User Manual

Boot Up NumLock Status

Sets the NumLock status when the system is powered on.
Settings Description
Off Forces keypad to behave as arrow keys
On Forces keypad to behave as 10-key
Typematic Rate Setting
Enables "Typematic Rate" and "Typematic Delay" functions.
Settings: [Disabled, Enabled]
Typematic Rate (Chars/Sec)
This item sets the rate (characters/second) at which the system
retrieves a signal from a depressed key.
Settings: [6, 8, 10, 12, 15, 20, 24, 30]
Typematic Delay (Msec)
This item sets the delay between, when the key was first pressed
and when the system begins to repeat the signal from the
depressed key.
Settings: [250, 500, 750, 1000]
Security Option
Selects whether the password is required every time the System
boots, or only when you enter Setup.
Settings Description
Setup Password prompt appears only when end users try to run
BIOS Setup
System Password prompt appears every time when the computer is
powered on and when end users try to run BIOS Setup
Full Screen Logo Show
Show full screen logo during BIOS boot up process.
Settings: [Disabled, Enabled]
Summary Screen Show
Show summary screen.
Settings: [Disabled, Enabled]
27