Signal Processing Product Control Program; Installing The Software; Starting The Program - Extron electronics FOXBOX SR HDMI User Manual

Signal Processing Product Control Program

The Extron Signal Processing Control Program, which communicates with the receiver via its
Configuration port or Remote RS-232 port, provides an easy way to operate the receiver.
The program is compatible with Windows 2000, Windows XP®, or later. Updates to this
program can be downloaded from the Extron website (www.extron.com).

Installing the Software

The program is contained on a DVD. To install the software, insert the DVD into the drive.
The Extron software DVD window should appear automatically. If it does not self-start, run
Launch.exe from the DVD. Click the
Install. Follow the instructions that appear on the screen. By default, the installation creates
a
directory, and it places five icons into a group folder named "Extron Electronics\FOX Extender
Control Program." The five installed icons are:
•
•
•
•
•

Starting the Program

Start the Extron Signal Processing Product Control Program as follows:
1.
[
C:\Program Files Program Files (x86)
Check for Signal Processing Updates
Image Quick Capture
Signal Processing Products Control Program Help
Signal Processing Products Control Program
Uninstall Signal Processing Products Control Program
Click >
Start Programs
> Signal Processing Product Control Program
The Communication Setup window appears (see figure 22).
Figure 22. Communication Setup Window
tab, scroll to the desired program, and click
Software
for Windows 7]\
> >
Extron Electronics
FOXBOX SR HDMI • Remote Control
\
Extron Signal Processing
Signal Processing
.
27