Table of Contents
Advertisement
POWER TOOL VACUUMING
WARNING:
BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION, ENTITLED 'SAFETY
INSTRUCTIONS & WARNINGS'. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS,
OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT
LIMITED TO; LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-BASE PAINTS, GASOLINE,
ALCOHOL OR AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO;
COAL, MAGNESIUM, GRAIN OR GUN POWDER. TO REDUCE THE RISK OF HEALTH HAZARDS
FROM VAPORS OR DUST, DO NOT VACUUM TOXIC MATERIALS.
1.
Place the thicker end of the powertool hose straight onto the vacuum hose and the other end onto the
reduction adaptor supplied.
2.
Select and cut the right section of the reduction hose of the power adaptor and connect to dust outlet of
power tool.
3.
Plug the power tool into the power socket.
4.
On/Off switch presses to position:
5.
Vacuum cleaner switches on to vacuum the dust off when turn on the power tool.
6.
Vaccum cleaner switches off few second after the power tool switch off to vaccum off the redual dust.
7.
Empty the tank and clean the dirt tank after every using.
LIQUID VACUUM OPERATION
II
10
Hide quick links:
Advertisement
Table of Contents
