1. Manuals
  2. Brands
  3. Vacmaster Manuals
  4. Vacuum Cleaner
  5. VMVQ1220SS
  6. Operator's manual

Vacmaster VMVQ1220SS Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Wet/Dry Vacuums
Operator's Manual
Model No.
VMVQ1220SS
FOR YOUR SAFETY
Read and understand this manual before use
Keep this manual for future reference
IP24

Advertisement

Table of Contents
loading

Related Manuals for Vacmaster VMVQ1220SS

Summary of Contents for Vacmaster VMVQ1220SS

  • Page 1 Wet/Dry Vacuums Operator’s Manual Model No. VMVQ1220SS FOR YOUR SAFETY Read and understand this manual before use Keep this manual for future reference IP24...

  • Page 2: Table Of Contents

    ® ® Vacmaster takes pride in producing a high quality, durable product. This Vacmaster product carries a limited two (2) year warranty against defects in workmanship and materials from date of purchase under normal household use. If product is to be used for commercial, industrial or rental use, a 90 day limited warranty will apply.
  • Page 3 SAVE THIS MANUAL FOR FUTURE REFERENCE. When using an electrical appliance, basic precautions should always be followed including the following: WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: • Do not run vac unattended. • Do not vacuum, or use this Wet/Dry Vac near flammable liquids, gases, or explosive vapors like gasoline or other fuels, lighter fluids, cleaners, oil-based paints, natural gas, hydrogen, or explosive dusts like coal dust, magnesium dust, grain dust, or gun power.

  • Page 4: Double Insulation Instructions

    DOUBLE INSULATION INSTRUCTIONS This Wet/Dry Vac is double-insulated, eliminating the need for a separate grounding system. Use only identical replacements parts. Read the instructions for Servicing Double-Insulated Wet/Dry Vacs before servicing. Use this Wet/Dry Vac as described in this manual. Observe the following warnings that appear on the motor housing of your Wet/Dry Vac.

  • Page 5: Unpacking And Checking Carton Contents

    UNPACKING AND CHECKING CARTON CONTENTS Remove entire contents from carton. Check each item against the contents list. Contents List Description……………………..…….…QTY Vac Assembly…………………………….. Hose ……………………………....Extension Wands..……………………..Floor Nozzle……………………..Crevice Tool……………………………… Foam Sleeve Filter....….……….. Collection Bag …........Reusable Cloth Filter……..Feet With Casters………………………... 6 Screws (Bag)…………………..………..

  • Page 6: General Assembly Instructions

    GENERAL ASSEMBLY INSTRUCTIONS A Philips head screw driver is required for assembly. WARNING : DO NOT PLUG IN POWER CORD TO POWER OUTLET, MAKE SURE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VAC UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY 1.

  • Page 7: Dry Vacuum Operation

    DRY-VACUUM OPERATION DRY VACUUMING WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION, ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT LIMITED TO;...

  • Page 8: Wet Vacuum Operation

    O = OFF I = ON DO NOT USE THE CLOTH FILTER FOR LIQUID VACUUMING DO NOT USE COLLECTION BAG FOR LIQUID VACUUMING WET-VACUUM OPERATION LIQUID VACUUMING WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION, ENTITLED ‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR.

  • Page 9: Blowing Operation

    REMEMBER! The foam filter must be removed after wet vacuuming, and a cloth filter must be installed before dry vacuuming again. BLOWING OPERATION This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructions listed. WARNING: ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH AUSTRALIAN STANDARDS WARNING: KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.

  • Page 10: Installing & Cleaning Cartridge Filter

    2. Disconnect the hose from the vacuum, turning large end in counter clockwise direction. (fig.2) 3. Undo the latches and remove the power head from the container. (fig.3) 4. Clear all dirt or debris from the container and hose. (fig.4) 5.

  • Page 11: Installing & Cleaning Foam Sleeve Filter

    INSTALLING & CLEANING FOAM SLEEVE FILTER Installing Foam Sleeve Filter 1. Verify that the power cord is disconnected from the outlet. (fig.1) 2. Remove power head and place in upside down position. Follow instructions to remove cloth filter. 3. Carefully slide foam sleeve filter down over the filter cage making sure the whole cage is covered. (fig.2 &...

  • Page 12: Exploded View And Parts List

    PARTS LIST - EXPLODED VIEW...

Table of Contents