Download Print this page

Advertisement

Quick Links

WET & DRY
vACUUm CLEANER
vmvF1515HJ
ipx4
vmvF1515HJ / 1500W / 15L

Advertisement

loading

Summary of Contents for Vacmaster vmVF1515HJ

  • Page 1 WET & DRY vACUUm CLEANER vmvF1515HJ ipx4 vmvF1515HJ / 1500W / 15L...
  • Page 2: Table Of Contents

    Parts List - Exploded View _________________________________________________ thank you for purchasing this vacmaster® wet/dry vacuum cleaner. Feel confident that with vacmaster® you are obtaining a high quality product engineered for optimal performance. this vacuum is capable of picking up liquids and dry materials.
  • Page 3: Warranty

    • Do not vacuum up ashes, hot coals or the like, large fragments of glass and sharp Vacmaster® takes pride in producing a high quality, durable product. This objects.
  • Page 4 drugs, if you are currently under medical care, or if you are tired. DISpoSal InformaTIon • Check the appliance and the power cord regularly for any possible damage. Don’t The appliance contains electric and electronic components and may not be disposed use damaged appliances.
  • Page 5: General Assembly Instructions

    Bag with 4 Screws............Operator’s Manual............ENERAL ASSEmBLY iNStRUCtiONS WARNiNG: Do noT plUg In poWEr CorD To poWEr oUTlET, maKE SUrE plUg IS DISConnECTED BEforE aSSEmBlIng THE WET/Dry VaC Handle Cord Rewind Button UnpaCKIng yoUr WET/Dry VaCUUm & gEnEral aSSEmBly UNPACKING YOUR WET/DRY VACUUM &...
  • Page 6: Dry Vacuum Operation

    stub, taking care not to damage the bag. (fig. 4) 5. Place the power head back on the container, aligning the top section with the latches, and lock into place. (fig. 5) OPERATING INSTRUCTIONS: DRY VACUUMING 6. Insert the locking end of the hose into the vacuum port on the power head and screw in place.
  • Page 7: Wet Vacuum Operation

    action when the container reaches its maximum capacity. you will notice an increase in motor speed. When this happens, turn off the machine, disconnect Et-vACUUm OpERAtiON from power supply, and drain the liquid into a suitable receptacle or drain. To continue vacuuming, refit the container with power head. after wet WARNiNG: BE SURE tO READ, UNDERStAND, AND AppLY iNFORmAtiON, vacuuming, turn the machine off and remove plug from power supply.
  • Page 8: Installing & Cleaning Foam Sleeve Filter

    only. a dry cartridge filter is necessary to pick up dust. If the cartridge filter Installing and Cleaning HEpa filter is wet, it will clog quickly and be very difficult to clean. Handle the filter 1.Verify that the power cord is disconnected from the outlet. (fig.1) carefully when removing it for cleaning and replacing it.
  • Page 9: Parts List - Exploded View

    ARtS LiSt -ExpLODED viEW ROUBLESHOOtiNG Symptom possible Causes Corrective action 1) No power supply. 1) Check power supply – cord, breakers, fuses. Vacuum will not 2) Faulty power cord. 2) Unplug and check the operate power cord. If damaged, have it repaired by a professional.
  • Page 10 List Key number Drawing number Description Quantity GD41BX.40.01 Handle VH60P1.16.00 Power Head Assembly WODQ10.01.12 Power Switch VH60P1.17.00 Float & Filter Cage FV9543.03.03 Cartridge Filter FV9543.03.20 Filter Retainer TVQTGL.17.00 Left Rear Wheel VH60P1.20.01 Container TVQTJL.08.00 Caster FV9241.04.01 Tool Caddy TVQTDK.11.00...
  • Page 11 vmvF1515HJ...