4-2-4 Reel Disk T, Brake T, Lever Eject
4-2-4(a) Disassembly
Note 1 : When disassembling, take care not to deform
the part. Do not stain the post.
1) Lift up the Brake T ´.
2) Lift up the Reel Disk T Œ.
3) Separate the Lever Eject's hook from the Main
Chassis, and then Lift up the Lever Eject ˇ.
SHAPE OF PIN ˆ
Samsung Electronics
BRAKE T ´
Fig. 4-14 Reel Disk T, Brake T, Lever Eject
4-2-4(b) Reassembly
1) Insert the Lever Eject ˇ into the shape of pin ¨,
and then lock the Lever Eject's hook Eliminate
this step.
2) Mount the Reel Disk T Œ to the pin Ø.
3) Insert the Brake T ´ into the shape of pin ˆ.
Œ REEL DISK T
ˇ LEVER EJECT
Ø PIN
6
¨ SHAPE OF PIN
4
Disassembly and Reassembly
4-9