Ieee 1394 Data Transfer - Samsung VP-D353 Service Manual

IEEE 1394 Data Transfer

Transferring IEEE1394 (i.LINK)-DV Standard Data Connections
Connecting to a DV Device (DVD Recorder, Camcorder, etc.)
■ Connecting to other DV standard products.
A standard DV connection is quite simple.
If a product has a DV port, you can transfer data by connecting to the DV port using the correct cable.
!!! Please be careful since there are two types of DV ports, (4pin, 6pin). This Camcorder has a 4pin terminal.
■ With a digital connection, video and audio signals are transmitted in digital format, allowing high quality images
to be transferred.
Connecting to a PC
■ If you want to transmit data to a PC, you must install an IEEE 1394 add-on card into the PC. (not supplied)
The frame rate for video capture is dependent on the capacity of the PC.
■
[ Notes ]
■ When you transmit data from the Camcorder to another DV device, some functions may not work.
If this occurs, please reconnect the DV cable or turn the power OFF and ON again.
■
When you transmit data from the Camcorder to PC, PC function button is not available in M.Player mode.
■ Do not use the Camcorder and IEEE1394 together as this will cause IEEE1394 to shut off.
■
Do not connect the Camcorder to a PC using both DV and USB cables. It may not operate properly.
■ Operation is not guaranteed for all computer environments recommended above.
■
The IEEE1394 cable (DV cable)is sold separately.
■ Video Capture software is commercially available.
■
Most DV enabled PCs have a 6 pin socket. In this case, a 6pin/4pin cable is required for the connection.
■ Most DV enabled Notebooks and Laptops have a 4 pin socket. Use a 4pin/4pin cable for the connection.
■
DIS and COLOR NITE SHUTTER are not available when in DV (IEEE1394) mode.
■ If DV(IEEE1394) mode is set, DIS and COLOR NITE SHUTTER modes will be released.
ENGLISH
IEEE 1394 Data Transfer
System Requirements
■ CPU: faster Intel ®
Operating system: Windows
■
■ Main memory: more than 64 MB RAM
IEEE1394 add-on card or built in IEEE1394 card
■
Recording with a DV Connection Cable (VP-D351i/D352i/D353i/D354i/D355i only)
1. Set the Power switch to PLAYER.
2. Set the Mode switch to TAPE. (VP-D353i/D354i/D355i only)
3. Connect the DV cable (not supplied) from the DV jack of the Camcorder
to the DV jack of the other DV device.
■ Make sure that
4. Press the Start/Stop button to begin REC PAUSE mode.
■ PAUSE is displayed on the LCD screen.
5. Start playback on the other DV device while you monitor the picture.
6. Press the Start/Stop button to start recording.
If you want to pause recording momentarily, press the Start/Stop button again.
■
7. To stop recording, press the
[ Notes ]
■ When using this Camcorder as a recorder, the pictures that appear on a monitor may seem uneven,
however recorded pictures will not be affected.
■ Operation is not guaranteed for all the recommended computer environments mentioned above.
■ While transmitting data from the Camcorder to PC at strong electric field and strong magnetic field, VIDEO signal or AUDIO signal
may transmit with noise.
80 80
Samsung Electronics
Pentium III™ 450MHz compatible.
® 98SE, ME, XP, Mac OS (9.1~10.2)
is displayed on the LCD screen.
(STOP) button.
Operating Instructions
ENGLISH
79 79
DV
DV
USB
USB
AV
MIC
AV
MIC
11-7