Samsung VP-D353 Service Manual page 115

ENGLISH
Getting to Know Your Camcorder
Rear & Bottom View
1. Lithium battery cover
2. Charging indicator
1. Lithium battery cover
2. Charging indicator
3. Memory card slot
(VP-D353(i)/D354(i)/D355(i) only)
4. Battery release
5. Tripod receptacle
16 16
Preparation
Lithium Battery Installation
Battery Installation for the Internal Clock
✤
The Lithium battery maintains the clock function and preset contents of the memory; even if the Battery pack or AC Power
adapter is removed.
✤
The Lithium battery for the Camcorder lasts about 6 months under normal operation from the time of installation.
✤ When the Lithium battery becomes weak or dead, the date/time indicator will display
00:00 1.JAN.2005 when you set the Date/Time to on.
When this occurs, replace the Lithium battery with CR2025 type.
1. Remove the Lithium-ion battery from the rear of the Camcorder.
2. Open the Lithium battery cover on the rear of the Camcorder.
3. Position the Lithium battery in the Lithium battery holder, with the positive (
terminal face up.
4. Close the Lithium battery cover.
Battery Installation for the Remote Control (VP-D353(i)/D354(i)/D355(i) only)
✤ You need to insert or replace the Lithium battery when:
- You purchase the Camcorder.
- The remote control doesn't work.
✤
Position the Lithium battery in the Lithium battery holder, with the positive (
terminal face up.
✤
Be careful not to reverse the polarity of the battery.
[ Note ]
The Lithium battery must be inserted in the correct direction.
Warning: Keep the Lithium battery out of the reach of the children.
Should any battery be swallowed, consult a doctor immediately.
Samsung Electronics
3. Memory card slot
(VP-D353(i)/D354(i)/D355(i)
only)
5. Tripod receptacle
Memory Card Slot (Usable Memory Card)
VP-D353(i) only
Memory Stick
Memory Stick PRO
)
)
Operating Instructions
4. Battery release
VP-D354(i)/D355(i) only
Memory Stick
Memory Stick PRO
SD/MMC
ENGLISH
19 19
11-3