Incoming Calls Function - Fiat Connect Nav+ User Manual

Center number
Selecting - by rotating the knob 15-
fig. 1 and pressing it to confirm -
"Center number" using the multi-
function keys 16-fig. 1 (0-9, + and *
keys) the user can set the service
Provider phone number fig. 66. This
number is given by the Provider.
Messages
fig. 66
"Last calls" FUNCTION
Gives access to a list of the last 10 in-
coming/outgoing calls. Select the Last
Calls key by turning knob 15-fig. 1
and confirm by pressing the knob.
"Incoming Calls" function
"Incoming Calls option" pops up the
list of the last 10 calls received. The list
shows the name (if stored in the di-
rectory) and the phone number rele-
vant to the most recently received
calls fig. 67.
The list is managed and updated by
the system automatically.
F0Q3079g
Selected
Dial
Center number
fig. 67
To call directly one of the entries in
the list proceed as follows:
– select an entry in the list by rotat-
ing the knob 15-fig. 1;
– push ß 3-fig. 1 to start the call
(see fig. 40).
After selecting the required entry,
pressing the knob 15-fig. 1 opens a
window with detailed information re-
garding selected name and number fig.
68. Icon keys "Call" and "Store" are
available on the display:
– select "Call" by rotating and press-
ing the knob 15-fig. 1: system starts
the call to the displayed number;
F0Q3044g
Last number received
fig. 68
F0Q3045g
Name
Number
Call
Store
79