Trip: My Car - Fiat Connect Nav+ User Manual

To change any set data, select
"Change" icon; a screen with the fol-
lowing functions is displayed fig. 141:
"Limit" (km/h or mph, according to
set unit;
"Alarm";
"OK".
IMPORTANT Changes can only be
performed with ignition key to ON.
With ignition key at OFF any attempt
to enter changes is rejected and the
display will show "Setup change failed".
fig. 141
"Limit (km/h or mph)"
Select "Limit (km/h or mph)" with
the knob 15-fig. 1 and press it to con-
firm. Rotate the knob 14-fig. 1 to
change the set speed limit by steps of
5 km/h (or mph according to set unit).
Press the knob 15-fig. 1 to confirm.
"Alarm"
The "Alarm" function enables/dis-
ables warning indication when set
speed limit is exceeded.
To enable/disable this function, select
and confirm "Alarm" by rotating and
pressing the knob 15-fig. 1. The dis-
play will show: "ENABLED" or "DIS-
ABLED".
F0Q3092g
"OK"
To confirm selected options, select
"OK" with the knob 15-fig. 1 and
then press it.
TRIP UNITS OF MEASURE
The "MY CAR" function enables to
change the units of measure relevant
to distance, speed and fuel consump-
tion.
When in the MAIN screen, select
MY CAR mode using knob 15-fig. 1
and confirm by pressing the knob to
gain access to the screen in fig. 142,
which contains the current settings.
06
fig. 142
F0Q3111g
SYSTEM
119