Radio Setup Function; Loc/Dx Function; Mono/Stereo Function - Fiat Connect Nav+ User Manual

LOC/DX function

(tuner sensitivity adjustment)
With this function it is possible to
change the sensitivity of automatic ra-
dio station searching. When low sen-
sitivity "LOC" is set, only stations with
excellent reception are sought; when
high sensitivity "DX" is set, all the sta-
tions are sought. If you are in an area
with a large number of broadcasters
and you want the ones with the
strongest signal, choose low sensitivi-
ty "LOC".
To choose between low or high
tuner sensitivity, select the "LOC/DX"
function with the knob 15-fig. 1 and
then press it repeatedly. The abbre-
viation of the sensitivity chosen will be
shown on the display:
– LOC = low sensitivity;
– DX = high sensitivity.
"Radio setup" FUNCTION
To turn on the "Radio Setup" func-
tion, select the "Radio Setup" icon
with the knob 15-fig. 1 and press it
to confirm. This function enables to
go to next window to adjust radio
settings. When in this window it is
not possible to change the audio
source. The following functions are
displayed fig. 9:
– Mono/Stereo
– PTY-Prg. Type
– RDS
– Regional.
Choosing and confirming "OK", goes
back to the previous screen storing
the adjustments set. Pressing "ESC"
14-fig. 1 goes back to the previous
screen resuming the settings stored
previously.
fig. 9

Mono/Stereo function

To pass from "Mono" to "Stereo" or
vice versa, select "Mono/Stereo" by
turning the knob 15-fig. 1 and press
it to confirm. This function is only
available on FM band.
When stereo reception is on the dis-
play shows "STEREO", when it is off
the display shows "MONO".
When the signal of the station tuned
is weak, to improve the sound quality,
it is advisable to switch to "MONO".
F0Q3006g
29