Audio Setup Function; Cd-Changer Mode - Fiat Connect Nav+ User Manual

Delete
"Delete" icon enables to clear the
CD name.
To turn the function on, select
"Delete" icon rotating the knob 15-
fig. 1 and pressing it.
Delete name
"Delete name" icon enables to delete
a previously stored sequence name.
To turn the function on, select
"Delete name" icon rotating the knob
15-fig. 1 and pressing it.
OK
To confirm your choices, select the
"OK" icon with the knob 15-fig. 1
and press it; the name and the asso-
ciated sequence are stored.
42
IMPORTANT In case of buffer full,
a warning message "WARNING, CD
DIRECTORY FULL" will be displayed
to point out the problem. The user
shall have to delete some previously
stored CD names.
"AUDIO SETUP" FUNCTION
(AUDIO ADJUSTMENTS)
To access the audio setup menu
while listening to a CD, select the "Au-
dio setup" icon with the knob 15-
fig. 1 and press it to confirm.
For the description of the different
functions available in the menu, see the
corresponding paragraph of the "RA-
DIO MODE" chapter.
CD-CHANGER
MODE (if installed)
IMPORTANT Never use 8 cm au-
dio or MP3 CDs, even with the spe-
cial adapter, since this format damages
the system.
The CD-changer cannot play CDs in
the MP3 format.
If the multiple CD player is installed,
selecting CDC source (CD-Changer),
the following functions are displayed
fig. 21:
– Shuffle
– Prog
– Scan
– Compression
– CDC setup
– Audio setup.
6
fig. 21
F0Q3017g