Audio Setup Function; Mp3 Mode - Fiat Connect Nav+ User Manual

OK
To confirm the chosen option, select
"OK" with the knob 15-fig. 1 and
press it.
During the operations available in the
"CDC Prog" function, buttons 5, 6
and 9-fig. 1 are disabled.
When removing the Compact Disc
from the multiple player or changing
the CD sequence, a new playback se-
quence shall be programmed.
CD name
This function can be selected only if
a Compact Disc is inserted in the mul-
tiple player.
If the CD already has a name, this will
be shown on the display.
"CD name" function allows to name
max. 10 CDs with 20 characters max.
For the description of the different
functions, refer to "CD Mode".
"AUDIO SETUP" FUNCTION
(AUDIO ADJUSTMENTS)
To access the audio setup menu
while listening to a CD, select the "Au-
dio setup" icon rotating the knob 15-
fig. 1 and press it to confirm.
For the description of the different
functions available in the menu, see the
corresponding paragraph of the "RA-
DIO MODE" chapter.

MP3 MODE

CONNECT Nav+ can recognize the
type of Compact Disc inserted. Dur-
ing the reading procedure to recog-
nize the disk the display shows "Read-
ing CD...". If the inserted CD is a MP3
one, a specific control is activated.
IMPORTANT Never use 8 cm au-
dio or MP3 CDs, even with the spe-
cial adapter, since this format damages
the system.
IMPORTANT CONNECT Nav+
builds MP3 CD folder-organized struc-
ture of files; folders are organized in
sequence with their own MP3 tracks
(up to max. four levels of folders/sub-
directories). Folder and file name
length shall not exceed 31 characters.
Characters: blank, ' (apostrophe), (
and ) (open and closed brackets) are
not admitted in MP3 track names.
When creating MP3 CD you must not
use these characters to name files oth-
erwise CONNECT Nav+ will not be
able to play it.
47