Audio Setup Function; Direct Selection Function; Define Playlist Function; Playlist Function - Fiat Connect Nav+ User Manual

To stop the MP3 CD, press briefly
"˙/II"9-fig. 1. To restart playing, press
briefly again ""˙/II" 9-fig. 1. To pause
the MP3 CD, press continuously
""˙/II" 9-fig. 1. "Stop" and "Pause"
cause the stop of track playing, main-
taining in the main screen information
about the last played song.
To eject MP3 CD 7-fig. 1 press but-
ton 8-fig. 1.
"Direct selection" FUNCTION
Use the Direct Selection option to
enter fast track selection mode.
Turn knob 15-fig. 1 to scroll through
the number of positions equivalent to
each track and confirm by pressing the
knob to start playing.
50
"Define Playlist" FUNCTION
"Define playlist" function allows the
management of max. 100 music pieces
among those included in the MP3 CD,
to be played in a specified sequence.
Dedicated windows allow the tracks
choice, addition or cancellation. It is
possible to add a single track or an en-
tire folder. This function is described
in detail in a specific paragraph below.
"Define playlist" icon key is disabled
when a MP3 CD is playing, you must
stop CD playing to enable it.
"Playlist" FUNCTION
The "Playlist" function enables or dis-
ables playback of user's previously
programmed track list. To turn this
function on/off, select the corre-
sponding icon with the knob 15-fig. 1
and then press it to confirm.
When the "Playlist" function is on,
symbol "" is shown near the corre-
sponding icon.
When inserting a MP3 CD coupled
to a playlist the "Playlist" function is
enabled automatically and symbol ""
will be displayed; otherwise the playlist
function is disabled automatically and
symbol "" near the icon will disap-
pear.
The icon key is disabled when a MP3
CD is playing, independently from
"Playlist" function enabling/disabling;
stop the CD to enable the icon key.