My Car - Fiat Connect Nav+ User Manual

The MY CAR mode enables to set
different car and CONNECT Nav+
system operating modes and parame-
ters.
Parameters and operating modes
have been grouped in the following
four areas:
– LANGUAGE
– DATE & TIME
– VEHICLE
– SYSTEM.
Every above area is then divided in
different sub-areas. Read carefully
through this chapter to learn any fea-
tures offered by CONNECT Nav+
system.
To enter MY CAR mode, when in
the MAIN screen, select MY CAR
mode using knob 15-fig. 1 and con-
firm by pressing the knob. The sum-
mary screen in fig. 160 is displayed.
148
M M Y Y C C A A R R
M M Y Y C C A A R R
IMPORTANT If the ignition key is
at OFF certain MY CAR informa-
tion/operations will only be accessible
for reference.
Any new setting on the CONNECT
Nav+, will be operative only after
check performed by car check com-
ponents; otherwise the warning mes-
sage "Setup change failed" will be dis-
played.
IMPORTANT To be sure that any
new setting is positively received by
car check components, it is strictly
necessary that ignition key is at ON.
For each item on the display, symbol
"" indicates whether the item is set.
On the right side of the display "Text
Language" shows which language for
written text is active, "VR language"
(Voice Recognition language) shows
which language is used by the system
for voice commands.
06
fig. 160
F0Q3111g
SYSTEM