Band Scan Function; Preset Scan Function - Fiat Connect Nav+ User Manual

IMPORTANT It may occur that
the Autostore function is unable to
find 6 stations with a strong signal; in
this case only the stations found are
stored.
IMPORTANT Activating the "Au-
tostore" function cancels the stations
stored previously in the FMAST or
AMAST band.
28
"Preset Scan" FUNCTION
The "Preset scan" function activates
stored station scanning in the chosen
frequency band. Each stored station
will be played for about 10 seconds.
To turn on the "Preset scan" func-
tion, select the "Preset scan" icon with
the knob 15-fig. 1 and then press it to
confirm.
During stations scan, the scanned
one is highlighted in the stored sta-
tions window and corresponding low-
bar button too. During operations the
string "Preset Scan" is displayed in the
main window.
Scanning will be interrupted by press-
ing knob 15-fig. 1 again (by taking care
to be positioned onto the "Preset
Scan" graphic key), or by selecting a
station previously memorized.
"Band Scan" FUNCTION
The "Band scan" function activates
station scanning in the chosen fre-
quency band. Each station frequency
will be displayed for about 10 seconds.
To turn the "Band scan" function on,
select the "Band scan" icon with the
knob 15-fig. 1 then press it to con-
firm.
During scanning, the display will
show "Band Scan".
Scanning will be interrupted by press-
ing knob 15-fig. 1 again (by taking care
to be positioned onto the "Preset
Scan" graphic key), or by selecting a
station previously memorized.