System Power Off - Fiat Connect Nav+ User Manual

Automatic switching on
Turning the ignition key to ON, will
turn the CONNECT Nav+ system on
automatically, thus activating or mak-
ing available all the functions described
in this manual.
Manual switching on
With the ignition key OFF press key
17-fig. 1 to turn on the CONNECT
Nav+ system in MAIN mode and
make available the following option
modules:
– AUDIO
– PHONE
– NAVIGATION
– MAP
– TRIP
– MY CAR
IMPORTANT With
switch-on, the TRIP and MY CAR
functional modules can be accessed
with a few restrictions. These limita-
tions are normal when switching the
system on manually by button 17-
fig. 1, since with engine off (key at
OFF), the car data transmission de-
vices are not operating.
Turning the ignition key to ON will
make all system functions active (See
TRIP computer and SETUP sections).
manual

SYSTEM POWER OFF

The CONNECT Nav+ system can
be switched off according to two dif-
ferent modes:
– deactivation dependent on ig-
nition key
– deactivation independent of ig-
nition key
The power-off mode can be chosen
in the SETUP module (see section
SETUP/ Power OFF).
17