Esc D N - Citizen CT-S280 Command Reference Manual

ESC d n

Support model
[Function] Printing and feeding the paper by "n" lines
[Code] <1B>H<64>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is common to the model]
Prints data in the print buffer and feeds paper by "n" lines. Specified lines do not remain.
[Caution] • After this command is executed, the beginning of the line is taken as the start position for the next
print.
• If [n×line feed width] exceeds approximately 1016 mm, this command feeds paper by approximately 1016
mm (40 inches).
[Default] The initial value is not defined.
[Sample Program]
LPRINT "AAAAA";
LPRINT CHR$(&H1B);"d";CHR$(2);
LPRINT "AAAAA";CHR$(&HA);
CT-S280 CT-S300
CT-S310
CT-S281
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
[Print Results]
AAAAA
2/6-inch line feed
AAAAA
- 58 -
BD2-2220 PMU series
CT-P29x series CT-S310 II