Esc M - Citizen CT-S280 Command Reference Manual

ESC m

Support model
[Function] Partial cutting of paper
[Code] <1B>H<6D>H
[Outline] [The specification which is common to the model]
• Executes partial cutting of paper.
[Caution] [The specification which is common to the model]
• This command only works it is entered at the beginning of a line.
• Before cutting paper, feed the paper more than the cutting position of paper from the print position. Without
this paper feeding, the character just after printing remains before the cutter.
[The specification which depend on the model]
CT-P290/292
•
This command does not function.
CT-S300/CT-S310/CT-S2000/CT-S4000/CT-S801/CT-S851
CT-S601/CT-S651/PMU series
• With label- or BM-supported model, this command does not function at the setting of BM
paper/label paper setting.
PMU2300III
• When presenter function is enabled, cut method is automatically set for full cut.
[Sample Program]
LPRINT "AAAAA";
LPRINT CHR$(&H1B);"J";
LPRINT CHR$(150);
LPRINT CHR$(&H1B);"m";
CT-S280 CT-S300
CT-S310
CT-S281
[Print Results]
AAAAA
AAAAA
CT-S2000 CT-S4000
CT-S801/851 CT-S601/651
Cut position
Paper feed
- 139 -
BD2-2220
CT-P29x series
Cut state
direction
PMU series
CT-S310 II